UGREEN Bluetooth 5.0 Transmitter and Receiver
Buy UGREEN Bluetooth 5.0 Transmitter and Receiver in Sri Lanka. 2 in 1 Wireless 3.5mm Bluetooth Adapter, Dual Devices Simultaneously, Aux Bluetooth Audio Car Adapter Compatible with TV Car Home Stereo System Headphones.
UGREEN Bluetooth 5.0 Transmitter Receiver
Technological advancement has led to a decrease in the use of cables and wires in electronics. Thanks to Bluetooth transmitters and receivers, you do not need to replace your old home theatre, TV set, or PC just because they are not Bluetooth-enabled.
UGREEN Bluetooth 5.0 Transmitter Receiver 2 in 1 Wireless Aux Bluetooth adapter will work well with your TVs, PCs, home theatres, car stereos, as well as MP4 players and transform these into Bluetooth enabled device
Specifications:
Input port | 3.5mm audio |
Frequency range | 2400MHz-2483.5MHz |
Frequency response | 20Hz-20kHz |
SNR | >90dB |
THD | <0.1% |
Codec | RX mode: SBC, MC TX mode: SBC |
Battery type | Li-Po |
Battery rated capacity | 145mAh 3.7V |
Limited charging voltage | 5.25V |
Battery charging time | 1. hrs |
Battery operating time | RX mode: 5.5hrs TX mode: 8hrs |
Transmission distance | 10m |
Battery Status
Status | LED indicator |
Battery Low | Slow blinking red |
Charging | Solid red |
Fully Charged | Solid blue |
Indicators
Status | LED indicator |
Pairing Mode | Light up blue 1 sec over red & blue alternate blinking |
Auto-reconnection | Light up blue 1 sec over blinking blue once per 5 seconds |
Power Off | Light up red for 1 sec and turn off |
Bluetooth Pairing | Red & Blue alternate blinking |
Bluetooth Connected | Blinking blue once per 10 seconds |
Factory Reset
In off mode, press and hold the multifunction button for 10 seconds, the indicator will glow solid blue for 2.5 seconds, indicating a successful reset.
UGREEN Bluetooth 5.0 Transmitter Receiver FAQ:
Q1. How to reset this Bluetooth adapter when it is unable to pair?
In off mode, press and hold the multifunction button for 10 seconds, the indicator will glow solid blue for 2.5 seconds, indicating a successful reset.
Q2.How to pair two devices at the same time?
TX Mode
- Please connect the product to Device A and refer to the above methods
- Short press the multifunction button twice to enter pairing mode, accompanying a blue light flashes twice per second. Re-open Bluetooth on Device B and the connection between the transmitter and Device B will be established.
- Play music to confirm both A/B devices have audio output.
RX Mode
- First, follow the “Bluetooth Connection” steps to connect the product to Phone A. Then turn off Bluetooth on Phone A once connected.
- Secondly, connect the product to Phone B Bluetooth.
- Thirdly, turn on Phone A Bluetooth access, it will reconnect to the product automatically.
- Finally, both Phone A and Phone B are connected to the product simultaneously.
How to use this 2 in 1 Bluetooth Adapter?
RX mode:
- Slide the power button to the “RX” position to enter Bluetooth receiving mode.
- Insert the product into the AUX port of the Bluetooth receiver (like a speaker) first. Then press and hold the multifunction button for 3 seconds to power it on and ready for pairing.
- Enable Bluetooth access on your phone, search “UGREEN″ and click it to connect. The voice prompt of “Bluetooth connected” indicates the connection is established.
Notice: In receiving mode, insert the product into the AUX jack of your car and power it by the provided USB cable. The product will automatically power on once you start your car.
TX mode:
Bluetooth Connection
- Slide the power button to the “TX” position to enter Bluetooth transmitting mode.
- Insert the product into the AUX port of the Bluetooth transmitter (like a computer) first. Then press and hold the multifunction button for 3 seconds to power it on and ready for pairing.
- Turn on your receiving devices (Bluetooth earphones/speakers) to enter pairing mode.
- The product will automatically pair with and connect to your device.
There are no reviews yet.